HD516 Flush Mount 5.1 Speakers with 6.5" Woofers Ceiling and Sub

Product Description

Acoustic Audio by Goldwood HD516 Flush Mount 5.1 Wired Speaker Set
Center Channel with Front and Rear, Right and Left with Sub home theater configuration
Traditional Passive speaker design, simply drive power from your home audio receiver
Pressure Lock Mounting System clamps tight to drywall with No Hardware Needed
Durable ABS Housings and Removeable Grills can be painted to match your décor

2 Pieces of HD-650 In Wall Speakers
6.5" Woven Fiber cone woofers and Pivoting Titanium tweeters
30Hz-22 kHz with 98dB at 8ohm and fits hole size 7.375" x 10.75" with 3" depth

2 Pieces of HD-6 In Ceiling Speakers
6.5" Woven Fiber cone woofers and pivoting Titanium tweeters
32Hz-22 kHz with 98dB at 8ohm, fits hole size 7.875" with 3.25" depth

1 Piece of HD-6c In Wall Center Speaker
6.5" Woven Fiber cone woofers and 12mm soft dome tweeter
33Hz-22 kHz with 98dB at 8ohm, fits hole size 19.25" x 7.5" with 3.25" depth

1 Piece of HD-S10 In Wall Passive Sub Speaker
10" Woven Fiber cone woofer with butyl rubber surround, 26-200Hz, 98dB at 8ohm
Fits hole size of 10.625" x 10.625" with a depth of 3.75"
A separate sub amplifier is required for this passive subwoofer

System Requirements
Any 5.1 home receiver with raw speaker wire outputs
Your receiver power should be no less than 10 and no more than 300 watts per channel
CL3 Rated in wall certified raw speaker wire to connect your receiver to the speakers

Applications
Home Theater Surround Sound Systems

What's in the box
6 Flush Mount Passive Speakers with Removeable Grills
Cut-Out Templates
Instruction Manual